 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
11. CLEAN LEFT-HAND OUTPUT
CARRIER ASSEMBLY (1).
a. Clean assembly and hardware. See
12. INSPECT LEFT-HAND OUTPUT
CARRIER ASSEMBLY (1).
a. Inspect assembly and hardware. See
b. Replace output carrier assembly (1)
if damaged. Record failure on
DA FORM 2407 and return defective
output carrier assembly to depot.
13. IF LEFT-HAND OUTPUT CARRIER
ASSEMBLY (1) WAS REPLACED,
GO TO END OF TASK. IF NOT,
GO TO STEP 14.
14. POSITION HUB (2) ON OUTPUT
CARRIER (1).
15. INSTALL 12 SCREWS (3) IN HUB (2).
a. Coat threads of 12 screws (3) with
sealant compound.
b. Install 12 screws (3) in hub (2).
17. INSTALL LOCKWIRE (4).
a. Using wire-twister pliers, install
16. USING 1/2-lNCH DRIVE TORQUE
Iockwire (4) through 2 screws (3).
WRENCH, TORQUE 12 SCREWS (3) TO
Repeat for remaining 10 screws.
20-25 ft-lb (3 mkg).
END OF TASK
4-347
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals