 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
5. INSPECT FOUR SPUR GEARS (2)
I
a. Inspect four gears (2) for damage.
See page 2-5.
b. If gears (2) are not damaged and
rotate freely, go to step 6. If gears
are damaged or do not rotate freely,
go to step 9.
4. INSPECT TAPERED CONE AND
I
ROLLERS (1).
CHECK END PLAY OF GEARS (2).
6.
a. Inspect cone and rollers (1) for
a. If end play between thrust washers (3)
damage. See TM 9-214.
and gears (2) is less than .060 inch
(1.52 mm), go to step 7. If not, go to
b. If cone and rollers (1) are damaged, go
step 9.
to step 9. If not, go to step 5.
TURN OUTPUT CARRIER (4) OVER
7.
INSPECT PLANETARY GEAR
8.
SPINDLES (5) AND PINS (6).
a. If all spindles (5) and pins (6) are
tight, go to step 11, If not, go to
step 9.
REPLACE OUTPUT CARRIER
9.
ASSEMBLY. RECORD FAILURE ON
DA FORM 2407 AND RETURN
DEFECTIVE CARRIER ASSEMBLY
TO DEPOT.
10.
EFFORT IS COMPLETE. GO TO
END OF TASK.
4-346
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals