 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
WARNING
Do not scratch carrier shaft surface when
Retaining ring is installed
installing retaining ring. Equipment can be
under high tension. Use care
damaged.
when removing and Installing
r e t a i n i n g ring. Personnel
35. INSTALL NEW WASHER (2) AND
can be Injured. Always wear
RETAINING RING (1).
goggles.
a. Install washer (2) on shaft (3).
34. REMOVE RETAINING RING (1).
b. Using retaining-ring pliers, install
a . Using retaining-ring pliers, remove
retaining ring (1) sharp-face up
retaining ring (1).
in groove (4) on shaft (3).
37. REMOVE RETAINING RING (1) AND
WASHER (2).
36. CHECK GAP BETWEEN WASHER (2)
a. Using retaining-ring pliers, remove
AND RETAINING RING (1).
retaining ring (1).
a. If gap is 0.006 to 0.013 inch
b. Remove washer (2).
(0.15 to 0.33 mm), go to step 38.
If not, go to step 37.
c. Go to step 21.
4-302
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals