 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
WARNING
Retaining ring is installed
under high tension. Use care
when removing and installing
retaining ring. Personnel can
b e injured. A l w a y s w e a r
goggles.
CAUTION
Beveled side of end plate must be installed
away from spur gear. End plate must be
installed by hand. Damage to equipment can
occur.
80. INSTALL BEARING (1) IF REMOVED.
Install bearing (1) and end plate (2) on
a.
spur gear (3). Be sure end plate is
installed with bevel side up.
b.
Using retaining ring pliers (Item 59),
install retaining ring (4) in groove (5).
82. INSTALL NEW BEARING (8).
a. If bearing (8) was removed, go to
step 82b. If not, go to step 83.
b.
Using arbor press and bearing installer
(Item 10), press bearing (8) into gear
cluster (9).
c.
Using retaining-ring pliers (Item 61),
install retaining ring (10).
81. INSTALL CLUTCH DISK (6) ON GEAR (7).
4-252
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals