 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
76. INSTALL RETAINING RING (3), IF
REMOVED.
a. Using retaining-ring pliers (Item 59),
install retaining ring (3) on gearshatt (2).
75. INSTALL TWO NEW BEARINGS (1) ON
GEARSHAFT (2).
77. REPAIRER AND HELPER, PLACE
HOUSING (4) ON TWO WOOD BLOCKS.
a. If either bearing (1) was removed, go to
step 75b. If not, go to step 76.
78. INSTALL GEARSHAFT (2).
b. Using arbor press and bearing installer
a. Using plastic-faced hammer, tap
(Item 7), press either bearing(s) (1) onto
gearshaft (2) into housing (4).
gearshaft (2).
79. INSTALL BEARING INNER RACE (5) IF
REMOVED.
a. Place bearing inner race (5) on gear
hub (6) with thick wall portion of race
facing gear (7).
Use bearing installer (Item 14A), press
b.
bearing inner race (5) onto gear hub (6).
GO TO NEXT PAGE
4-251
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals