Position transmission housing

A s s e m b l e rear oil pump (A) as illustrated.

Lubricate gears (B) and (C), and install cover (D).

NOTE

Gears B and C should be installed in same

position as removed.

Install rear oil pump assembly (A) into housing (B)

using guide bolts (C). Install three bolts (D) and

three lockwashers. Remove guide bolts, and install

Position transmission housing (A) so that front end

remaining two bolts and lockwashers. Tighten bolts

is up. Install oil pump guide bolts (B), speedometer

to 13 to 16 pound-feet torque. (Guide bolts are part

drive gear (C), and oil pump gasket (D). (Guide

of set 4910-572-8710 (8356165)).

bolts are part of set 4910-572-8710 (8356165).)