Install compressor assembly 4910-572-8643

Remove reverse planetary carrier and pitot oil

collector assembly (A). Remove thrust washer (B)

from counterbore of carrier.

(8356187) (A) cm reverse clutch assembly (B) to

compress springs. Remove two roll pins (C).

Remove compressor assembly.

Remove rear pitot tube (A). Using a 1/2-inch

wrench, remove five rear oil pump bolts (B) and

five washers.

Remove reverse back plate assembly (A). Remove

12 springs (B) from back plate (A) only if

replacement is necessary. Remove reverse ring gear

(C). four internal-splined plates (D), three external-

tanged plates (E), and apply plate (F) as a unit,

and separate parts.