 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-8145-203-13&P
(9) Place 7/16 inch socket over one of the bolts (1)
on the outside document holder (2).
(10) Use another 7/16 inch socket to remove the
corresponding nut (3) on the inside document
holder (4).
(11) Repeat Steps (9) and (10) at the three remaining
6
attachment points.
4
2
5
(12) Remove inside document holder (4), four
insulating washers (5), insulating washers (6),
bolts (7), and outside document holder (2).
1
3
1
3
5
6
b. Installation
NOTE
-
Perform Steps 1 through 4 for Model 101.
-
Perform Steps 5 through 12 for Model ESETC-
01.
(1) Paint new document holder (refer to Paragraph
4.11).
1
(2) Position four insulating washers (1), insulating
4
3
2
washers (2), outside document holder (3), inside
document holder (4), and insert four bolts (5).
(3) Install four nuts (6) over the bolts (5) on the
5
6
inside document holder (4).
(4) Hold bolt (5) heads with 7/16 inch socket and
torque nuts (6) to maximum of 2 ft/lbs.
5
6
2
1
4-6
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals