THERMOSTAT AND HOUSING

TM 55-1930-208-24

3-27. MANIFLD, WATER - Continued

b. Inspection.

(1) Inspect for damaged or missing hardware.

(2)

Inspect manifold for cracks, deformed mating surfaces, rust, and corrosion.

c. Installation.

(1) Refer to figure 3-61 and install four new gaskets (4) and place manifold (3) into position.

(2) Install eight lockwashers (2) and eight nuts (1). Torque nuts (1) to 25-30 lb-ft (34-41 Nm).

(3) Install two plugs (5).

(4) Refer to paragraph 2-17, TM 55-1930-208-10 and fill radiator with coolant.

(5) Refer to paragraph 3-28 and install the thermostat.

3-28. THERMOSTAT AND HOUSING

This task covers:

a. Removal

b. Cleaning

c. Inspection

Test

e. Installation

INITIAL SETUP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Materials Required:

Cloth, Soft (Item 23, Appendix C)

Gasket P/N 5169478

Solvent, Cleaning (Item 4, Appendix C)

Washer, Lock P/N MS35338-45

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Coolant drained (paragraph 2-17, TM 55-1930-208-10).

3-106