Installation. - TM-55-1740-203-13-P0111

TM 55-1740-203-13&P

3-27. CABLE - Continued.

S e r v i c e . Servicing of the cable consists of applying a small amount

of grease (MIL-G-10924) to the turnbuckle threads.

Then work it in

by screwing in and out the screws.

Installation.

(1) place turnbuckle (9, Figure 3-44) with attached cable into position.

(2) Install shackle (7) to bracket (8).

(3) Install pin (6) and cotter pin (5).

(4) Install shackle (3) to bracket (4).

Install pin (2) and cotter pin (1).

(5)

Figure

3-44.

Cable, Installation.

A d j u s t m e n t . To loosen the cable, turn the turnbuckle counterclock-

wise (as viewed from front)). To tighten the cable, turn the turn-

buckles clockwise (as viewed from the front).

E N D OF TASK

3-75