|
|
![]() TM 9-6920-746-12&P
WARNING (cont)
If bolt overrides the bullet, it should be checked for deformity and fractures, causing spilled propellant.
Clean weapon if spilled propellant is evident.
4-2. AMMUNITION WHICH FAILS TO FIRE. Dispose of any ammunition which fails to fire according to procedures
authorized by your commanding officer.
NOTE
Ammunition operation temperatures range from 0 to 100F (-18C to 38C).
4-3. CARE, HANDLING, AND PRESERVATION.
a. Protect ammunition from mud, sand, and water. If ammunition gets wet or dirty, wipe off at once with a clean
dry cloth.
b. Do not expose ammunition to the direct rays of the sun. If powder is hot, excessive pressure may develop
when fired.
c. Do not oil ammunition. Oiling of ammunition can cause a misfire.
NOTE
For further information on safety, care and handling of ammunition refer to TM 9-1300-206.
4-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |