RECOVERY FROM CATASTROPHIC POWER FAILURE PROCEDURE (Continued)

TM 9-6920-737-10

RECOVERY FROM CATASTROPHIC POWER FAILURE PROCEDURE (Continued)

10.

In the Trainer Shelter, make sure Terminal Printer ON/OFF rocker switch (17) is set to OFF position.

11.

At the IOS Power Panel, make sure four circuit breakers (18, 19, 20, and 21) and keyswitch (22) are set to OFF

position.

12.

In Computer Shelter, at the Electronic Power Distribution Panel, reset main circuit breaker (11) to ON.

13.

At Electronics Power Distribution Panel, set remaining seven circuit breakers (12) to ON, one at a time.

14.

Perform Electronic Equipment Power-Up Procedure (see 2-124) to complete recovery.

Change 1 2-211