ELECTRONIC EQUIPMENT POWER-UP PROCEDURE (Continued)

TM 9-6920-737-10

ELECTRONIC EQUIPMENT POWER-UP PROCEDURE (Continued)

28.

Set CREW STATION circuit breakers (41) and (42) to ON and make sure that AC ON

indicator lamp (43) and (44) light.

29.

At the bottom front of the Crew Station, make sure the INTERCOM AND TEST

EQUIPMENT OUTLET POWER circuit breaker (45) is set to ON and ON indicator lamp

(45A) is lit.

29.1 Make sure BROW PAD POWER and COMMUNICATION HEADSETS circuit breakers

(45B) are set to ON.

29.2 Make sure CREW COMPARTMENT POWER-AC MAIN POWER ON toggle switch (45C) is

set to on and indicator lamp (45D) is lit.

29.3 At the top front of the CREW station, locate the PULL TO DEGAUSS levers (45E) on back

of the monitors; pull and hold levers for 7 to 10 seconds.

29.4 At IOS Power Panel, make sure that four DC POWER SUPPLIES ON indicator lamps (45F)

are lit.

Change 2

2-129