Special Information - TM-9-6695-286-34P0005

TM 9-6695-286-34P

(4) FIG. column. This column lists the number of the figure where the item is located in Section II.

(5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced

in the adjacent figure number column.

5. Special Information

a. Repair parts for components of standards sets which can be identified as existing in the supply system will be

requisitioned through normal supply channels from the appropriate supply commodity manager.

b. Repair parts for components of standards sets which cannot be identified as to proper supply source will be

requisitioned from USAMICOM, using routing identifier B64 and furnishing, a minimum, the following as exception data.

(1) Component stock number of the individual end item to be repaired.

(2) Component manufacturer's equipment model number and serial number.

(3) The equipment manufacturer's reference number a listed In the appropriate manual for the desired repair

part.

(4) The repair part reference designation, circuit reference, circuit symbol schematic designation, or reference

number as listed in the manufacturer's manual.

(5) The technical specification of the repair part as contained in the appropriate manufacturer's manual.

(6) The title and date of the manufacturer's manual from which the Information In a and b(3), (4), and (5) above

was taken.

c. For requisitioning miscellaneous consumable maintenance supplies or expendable supplies, use CTA 50-970.

d. National Stock Numbers (NSN) that are missing for "P" source coded items have been applied for and will be

added to this manual by a change/revision when they are entered in the Army Master Data File (AMDF) Until the NSN's

are established and published, submit exception requisitions to Commander, U. S. Army Missile Command, ATTN:

AMSMI-LC-MM-A , Redstone Arsenal, Alabama 35898-5239.

e. The usable on code appears in the lower left corner of the Description column heading. Usable on codes e

shown "UOC" in the Description column justified left) on the first line applicable item description/nomenclature. Uncoded

items are applicable to all models. Identification of the usable on codes used in the RPSTL are:

f. This RPSTL does not contain illustrations for items listed in Section II, since the manufacturer's manual contains

exploded view illustrations which are adequate for repair parts location. Copies of the manufacturer's manuals for the

Pulse Generator, Hewlett-Packard, Model 8082A are furnished with the equipment for which this RPSTL is prepared. The

figure and item numbers in the listing are for locating the item within this RPSTL.