Explanation of Columns (Section IV) - TM-9-6695-272-34P0005

TM 9-6695-272-34P

Recoverability

Definition

Codes

-Item requires special handling or condemnation procedures because of specific reasons (i.e.,

precious metal content, high dollar value, critical material, or hazardous material). Refer to

appropriate manuals/directives for specific instructions.

c. FSCM (Column (3)). The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code which is used

to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.

d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer individual, company,

firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its

engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.

NOTE: When you use an NSN to requisition an item, the item you receive may have a different part

number from the part ordered, but go ahead and use or furnish it as the replacement part.

e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5)). This column includes the following information:

(1) The Federal item name and, when required, a minimum description to identify the item.

(2) The usable on code, when applicable (see paragraph 5, Special Information).

f. QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the item used in the parts list

which is prepared for a functional group, subfunctional group, or an assembly.

4. Explanation of Columns (Section IV)

a. NATIONAL STOCK NUMBER (NSN) INDEX

(1) STOCK NUMBER column. This column lists the NSN by National item identification number (NIIN)

sequence. The NIIN consists of the last nine digits of the

NSN

(i.e., 5305-01-674-1467 ). When using this column to locate an item, ignore the first 4 digits of the NSN. However, the

NIIN

complete NSN should be used when ordering items by stock number.

(2) FIG. column. Indicates the figure number used to identify each item appearing in the listing. The figures are

in numerical order in Section II.

(3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.

column. This item is also identified by the NSN listed on the same line.