Maintenance Code - TM-9-6695-260-34P0004

PG -

Item procured and stocked to provide for

sustained support for the life of the equipment. It

AD -

Item to be assembled at depot maintenance

is applied to an item peculiar to the equipment

level.

which, because of probable discontinuance or

shutdown of production facilities, would prove

XA -

Item is not procured or stocked because the

uneconomical to reproduce at a later time.

requirements for the item will result in the

replacement of the next higher assembly.

KD -

An item of a depot overhaul/ repair kit and not

purchased separately. Depot kit defined as a kit

XB -

Item is not procured or stocked. If not available

that provides items required at the time of over-

through salvage, requisition.

haul or repair.

XC -

Installation drawing, diagram, instruction sheet,

KF -

An item of a maintenance kit and not purchased

field service drawing, that is identified by

separately. Maintenance kit defined as a kit that

manufacturer's part number.

provides an item that can be replaced at

organizational or intermediate levels of

XD -

A support item that is not stocked. When

maintenance.

required, item will be procured through normal

supply channels.

KB -

Item included in both a depot overhaul/repair kit

and a maintenance kit.

NOTE

MO -

Item to be manufactured or fabricated at

Cannibalization or salvage may be used

organizational level.

as a source of supply for any items

coded above except those coded XA

MF -

Item to be manufactured or fabricated at the

and aircraft support items as restricted

direct support maintenance level.

by AR 700-42.

MH -

Item to be manufactured or fabricated at the

(2) Maintenance Code. Maintenance codes are

general support maintenance level.

assigned to indicate the levels of maintenance

authorized to USE and REPAIR support items. The

MD - Item to be manufactured or fabricated at the depot

maintenance codes are entered in the third and fourth

maintenance level.

positions of the Uniform SMR Code format as follows:

AO -

Item to be assembled at organizational level.

(a) The maintenance code entered in the third

position will indicate the lowest maintenance level

AF -

Item to be assembled

direct

support

authorized to remove, replace, and use the support item.

maintenance level.

The maintenance code entered in the third position will

indicate one of the following levels of maintenance:

AH -

Item to be assembled at general support

maintenance level.