Special Information - TM-9-6695-257-34P0006

TM 9-6695-257-34P

NOTE

h. Quantity Incorporated in Unit. Indicates the

quantity of the item used in the breakout shown on the

Repair

parts

should

not

illustration figure, which is prepared for a functional

requisitioned for plug-in boards

group, subfunctional group, or an assembly. A "V"

identified in the plug-in board

appearing in this column in lieu of quantity indicates that

exchange program, except by the

no specific quantity is applicable (e.g., shims, spacers,

depot designated to perform the

etc).

repair.

Repair of calibration set

components, with plug-in board

4. Special Information

assemblies

subassemblies

designated as program exchange

a. Repair parts for components of standards sets

replacements with a recoverability

which can be identified as existing in the supply system

code of L, will be accomplished by

will be requisitioned through normal supply channels

replacing the plug-in board.

from the appropriate supply commodity manager.

c. The plug-in board exchange program functions

b. Repair parts for components of standards sets

are as follows:

which cannot be identified as to proper supply source

will be requisitioned from USAMICOM, using routing

(1) Requisitioning instructions for initial issue

identifier B64 and furnishing as a minimum, the following

plug-in boards will be provided since new instrument

as exception data.

boards are included in the program.

(1) Component stock number of the individual

(2) As a plug-in board covered by the

end item to be repaired.

program fails, a replacement will be requisitioned.

(2) Component manufacturer's

equipment

Requisitions will be submitted to Commander, US Army

Missile Command, B64, Redstone Arsenal, AL 35809.

model number and serial number.

(3) Simultaneously with c(2) above, the

(3) The equipment manufacturer's stock

defective board being replaced will be shipped by

number as listed in the appropriate manual for the

certified mail, return receipt requested, to the following

desired repair part.

address:

(4) The repair part reference designation,

Transportation Officer

circuit reference, circuit symbol schematic designation,

Anniston Army Depot

or reference number as listed in the manufacturer's

M/F Field Service Stock

manual.

Anniston, AL 36201

(5) The technical specification of the repair

When requisitioning a replacement board, the turn-in

part as contained in the appropriate manufacturer's

document number of the replaced board shall be cited

manual.

on the requisition.

(6) The title and date of the manufacturer's

5. How to Locate Repair Parts

manual from which the information in paragraphs a, b(3),

(4), and (5) above was taken.

a. When NSN or reference number is unknown:

(1) First.

Using the table of contents,

determine the assembly (functional group) within which

the repair part belongs.