 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 PG--
Item procured and stocked to provide for
AH--
Item to be assembled at general support
sustained support for the life of the
maintenance level.
equipment. It is applied to an item
peculiar to the equipment which, because
AD--
Item to be assembled
at
depot
of probable discontinuance or shutdown of
maintenance level.
production
facilities,
would
prove
uneconomical to reproduce at a later time.
XA--
Item is not procured or stocked because
the requirements for the item will result in
KD--
An item of a depot overhaul/repair kit and
the replacement of the next higher
not purchased separately.
Depot kit
assembly.
defined as a kit that provides items
required at the time of over-haul or repair.
XB--
Item is not procured or stocked. If not
available through salvage, requisition.
KF--
An item of a maintenance kit and not
purchased separately. Maintenance kit
XC--
Installation drawing, diagram, instruction
defined as a kit that provides an item that
sheet, field service drawing, that is
can be replaced at organizational or
identified by manufacturer's part number.
intermediate levels of maintenance.
XD--
A support item that is not stocked. When
KB--
Item included in both a depot overhaul/
required, item ill be procured through
repair kit and a maintenance kit.
normal supply channels.
MO--
Item to be manufactured or fabricated at
NOTE
organizational level. AR 700-42.
Cannibalization or salvage may be used
MF--
Item to be manufactured or fabricated at
as a source of supply for any items
the direct support maintenance level.
coded above except those coded XA
and aircraft support items as restricted
MH--
Item to be manufactured or fabricated at
by AR 700-42.
the general support maintenance level.
(2) Maintenance Code. Maintenance codes are
MD--
Item to be manufactured or fabricated at
assigned to indicate the levels of maintenance
the depot maintenance level.
authorized to USE and REPAIR support items. The
maintenance codes are entered in the third and fourth
AO--
Item to be assembled at organizational
positions of the Uniform SMR Code format as follows:
level.
(a) The maintenance code entered in the
AF--
Item to be assembled at direct support
third position will indicate the lowest maintenance level
maintenance level.
authorized to remove, replace, and use the support item.
The maintenance code entered in the third position will
indicate one of the following levels of maintenance:
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals