REASSEMBLY (CONT). - TM-9-6650-235-13-P0113

ARMY

TM 9-6650-235-13&P

MARINE CORPS

TM-08552A-13&P

NOTE

Set sleeve spacer assembly (10) 39.27+0.032

Ensure the three wires in the metallic

inches from the rear of the rear sleeve assembly (5)

tubes are inserted through the holes

and tighten three setscrews (13). See appendix G

in the sleeve spacer assembly (10)

for converting decimal measurements into fractions.

when installing the sleeve spacer

assembly.

Trim any excess from the black, white, and blue

wires and solder the three wires to the three

electrical contacts (14). See TM 9-254.

Slide sleeve spacer assembly (10) on the three

metallic tubes (4), with screw hole (11) on the same

side as screw hole (12) in the rear sleeve assembly

(5).

Install tube (15) over assembled parts and aline

Position lock assembly (17) in the tube (15) with tab

holes in the tube with holes in sleeve spacer and

in hole and install machine screw (18).

rear sleeve assemblies.

Install machine key (19), machine screw (20), and

Install and tighten two machine screws (16).

tighten machine screws (18 and 20).

5-73