REASSEMBLY (REAR SECTION). (cont) - TM-9-6650-235-13-P0099

ARMY

TM 9-6650-235-13&P

MARINE CORPS

TM-08552A-13&P

Remove the color code tags and solder the three wires

(1, 2, and 3) to the three terminals in the rear sleeve

assembly (5). See TM 9-254.

b. Position sleeve spacer assembly 36.51+0.032

NOTE

inches from the end of the rear sleeve (5). See

Ensure the three wires in the metallic

appendix

for

converting

decimal

tubes are inserted through the holes

measurements into fractions.

in the sleeve spacer assembly (9)

c. Install and tighten three setscrews (12).

when installing the sleeve spacer

assembly.

d. Trim any excess from the three wires (1, 2, and

3) and solder the three wires to the three

a. Position sleeve spacer assembly (9) on the three

electrical contacts (13). See TM 9-254.

metallic tubes (4) with screw hole (10) on the

same side as screw hole (11) in the rear sleeve

assembly (5).

5-59