 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 ARMY
TM 9-6650-235-13&P
MARINE CORPS
TM-08552A-13&P
5-13.
ILLUMINATING HEAD ASSEMBI,Y--(EARLY PRODUCTION)--MAINTENANCE INSTRUCTIONS
(CONT).
REASSEMBLY (CONT).
3
a. Position small reflector (8) on two conductor
tubes (1) and metallic support tube (3).
b. Install and tighten three machine screws (9) to
secure small reflector (8).
c. Install preformed rubber packing (10) into groove
around small reflector (8).
4
a. If necessary, fabricate new wires. See appendix
instructions.
b. Install black wire (11) and white wire (12) in the
slots in the conductor tubes and push through
until approximately 1 inch protrudes from the end
of the two tubes (1).
c. Position sleeve assembly (13) with the notched
side between the white and black wires.
d. Push the wires through the holes in the sleeve
assembly (13).
e. Solder white wire (12) to terminal (14) and black
wire (11) to terminal (15) on sleeve assembly
(13). See TM 9-254.
5-20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals