DISASSEMBLY - TM-9-4931-710-14-P0041

TM 9-4931-710-14&P

5-5

RETICLE CELL ASSEMBLY MAINTENANCE INSTRUCTIONS-CONTINUED

DISASSEMBLY

Remove retaining ring (1) and sealing compound from

reticle (2) and cell (3). Remove reticle (2) from cell (3).

CLEANING

REPAIR

Clean all( parts per TM 9-254.

Repair is by replacement of authorized parts as required

REASSEMBLY

Note

The etched face of the

reticle must face slotted

side of cell. Aline reticle

lines 44 to 46 degrees from

center lines of slots.

Install reticle (1) in cell (2) and position the reticle

to 45.

Apply sealing compound (Item 8, Appendix D) to

three places, securing reticle (1) to cell (2).

Install retaining ring (3) and apply sealing

compound to cell (2) and retaining ring (3) in two

places.

Change 1 5-15