SECTION I. INTRODUCTION - TM-9-4931-599-34P0004

TM 9-4931-599-34P

SECTION I. INTRODUCTION

1. Scope.

This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic

equipment (TMDE); and other special support equipment required for performance of direct support and general support

maintenance including depot maintenance repair of the Target Designator Test Set Laser AN/PAM-1. It authorizes the

requisitioning, issue, and disposition of spares, repair parts and special tools as indicated by the source maintenance

recoverability (SMR) Codes.

2. General.

In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into the following sections:

a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the

performance of maintenance. The list also includes parts which must be removed for replacement of the authorized parts.

Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in

ascending figure and item number sequence. Bulk materials are listed in item name sequence.

b. Section III. Special Tools List. Not applicable.

c. Section IV. Illustrations . A series of exploded views of assemblies and subassemblies arranged in functional

group and figure number sequence. All exploded parts are identified with callout numbers placed in clockwise sequence.

These exploded views reflect repair parts plus those parts which must be removed in the process of disassembly for

replacement or repair of the authorized item.

c. Section V. National Stock Number and Part Number Index . A list, in National item identification number (NIIN)

sequence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence of all

part numbers appearing in the listing. National stock numbers and part numbers are cross-referenced to each illustration

figure and item number appearance.

3. Explanation of Columns (Sections II and III).

a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.