Section I. INTRODUCTION - TM-9-4931-509-34P0003

TM 9-4931-509-34P

Section I. INTRODUCTION

Scope. This manual lists spares and repair

(2) Item Number.

The number used to

parts that are required for maintenance of Mainframe

identify each item called out in the list.

Counter, Hewlett-Packard Model 5345A; Frequency

b. Source, Maintenance, and Recoverability

Plug-In, Hewlett-Packard Model 5257A; Video Plug-In,

(SMR) Codes.

Hewlett-Packard Model 5261A; Frequency Plug-In,

(1) Source Code. Source codes indicate the

Hewlett-Packard Model 10590A; Frequency Plug-In,

manner of acquiring support items for maintenance,

Hewlett-Packard Model 5355A; and Video Amplifier,

repair, or overhaul of end items. Source codes are

Hewlett-Packard Model K87-59992A. It authorizes the

entered in the first and second positions of the uniform

requisitioning and issue of spares and repair parts as

SMR code format as follows:

indicated by the source and maintenance codes.

Code

Definition

2. General. This. repair parts and special tools list

PA-

Item procured and stocked for anticipated

(RPSTL) is divided into the following sections:

or known usage.

a. Section II. Repair Parts List. A list of spares

(2) Maintenance Code. Maintenance codes

and repair parts authorized for use in the performance of

are assigned to indicate the levels of maintenance

maintenance. Parts are listed in alphabetical sequence

authorized to USE and REPAIR support items. The

within each figure number.

maintenance codes are entered in the third and fourth

b. Section III. Special Tools List. Not applicable.

positions of the uniform SMR code format as follows:

c. Section IV. National Stock Number and Part

(a) The maintenance code entered in

Number Index. A

list,

National

item

the third position will indicate the lowest maintenance

identification number (NIIN) sequence, of all National

level authorized to remove, replace, and use the

stock numbers (NSN's) appearing in the listings,

support item.

followed

list

in alphanumeric

This position will contain the following code:

sequence of all part numbers appearing in the listings.

Code

Application/Explanation

NSN's and part numbers are cross-referenced tothe

F-

Support item is removed, replaced, and

figure and

item

number appearance.

used at the direct support level.

3. Explanation of Columns

(b) The maintenance code entered in

the fourth position indicates whether the item is to be

a. Illustration. This column is divided as follows:

repaired and identifies the lowest maintenance level

with the capability to perform complete repair (i.e., all

(1) Figure Number.

Indicates the figure

authorized maintenance functions). This position will

number of the item shown.

contain the following maintenance code: