Part Number - TM-9-4931-502-34P0005

TM 9-4931-502-34P

H-

Reparable item.

When uneconomically

have a different part number than the

reparable, condemn and dispose at the general

part being replaced.

support level.

e. Federal Supply Code for Manufacturer (FSCM).

D-

Reparable item.

When beyond lower level

The FSCM is a 5-digit numeric code listed in SB 708-42

repair capability, return to depot. Condemnation

which is used to identify the manufacturer, distributor, or

and disposal not authorized below depot level.

Government agency, etc.

L-

Reparable item. Repair, condemnation, and

f. Description. Indicates the Federal item name

disposal not authorized below depot/specialized

and, if required, a minimum description to identify the item.

repair activity level.

The physical security classification of the item is indicated

by the parenthetical entry (insert applicable physical

A-

Item requires special handling or condemnation

security classification abbreviation, e.g., Phy Sec C1 (C)-

procedures because of specific reasons (i.e.,

Confidential, Phy Sec C1 (S)-Secret, Phy Sec C1 (T)-Top

precious metal content, high dollar value, critical

Secret). Items that are included in kits and sets are listed

material or hazardous material).

Refer to

below the name of the kit or set with the quantity of each

appropriate manuals/directives for specific

item in the kit or set indicated in the quantity incorporated

instructions.

in unit column. When the part to be used differs between

serial numbers of the same model, the effective serial

c. National Stock Number (NSN). Indicates the

numbers are shown as the last line of the description. In

NSN assigned to the item and which will be used for

the Special Tools List, the initial basis of issue (BOI)

requisitioning.

appears as the last line in the entry for each special tool,

special Test, Measurement, and Diagnostic Equipment

d. Part Number. Indicates the primary number used

(TMDE), and other special support equipment. When

by the manufacturer (individual, company, firm,

density of equipments supported exceeds density spread

corporation, or Government activity), which controls the

indicated in the BOI, the total authorization is increased

design and characteristics of the item by means of its

accordingly.

engineering drawings, specifications, standards, and

inspection requirements to identify an item or range of

g. Unit of Measure (U/M). Indicates the standard of

items.

the basic quantity of the listed item as used in performing

the actual maintenance function.

This measure is

NOTE

expressed by a two-character alphabetical abbreviation

(e.g., ea, in, pr, etc). When the unit of measure differs

When a stock numbered item is

from the unit of issue, the lowest unit of issue that will

requisitioned, the item received may

satisfy the required units of measure will be requisitioned.