|
|
TM 9-4931-381-14&P-1
OPERATOR ASSISTED SELF TEST PROCEDURE
Press YES key (1).
q
Press NO key (2).
q Find displayed message in OAST Fail Code
q Message display reads -
TEST PASSED:
Index.
Refer to OAST Fail Code Index,
SIMULATORS
q Rerun operator assisted self-test,
.
Go to block 1,
I
q Test SENSITIVITY potentiometer.
q Set THERMAL TEST switch (3) to OFF.
q Set THERMAL MODE switch (4) to ON and
press CON key (5).
q Message display reads -
SENSITIVITY CONTROL -
q Turn SENSITIVITY knob (6) fully
5
wise.
q Press CON key (5).
q Continue test.
q Message display reads -
SENSITIVITY CONTROL - FULL
q Turn SENSITIVITY knob (6) fully counter-
clockwise.
q Press CON key (5).
q Message display reads -
SENSITIVITY CONTROL - MIDRANGE
. Turn SENSITIVITY knob (6) to midrange
position.
q Press CON key (5).
q Test BRIGHTNESS potentiometer.
q Message display reads -
BRIGHTNESS CONTROL -
q Turn BRIGHTNESS knob (7) fully clock-
wise.
. Press CON key (5).
q Continue test.
q Message display reads -
BRIGHTNESS CONTROL - FULL
q Turn BRIGHTNESS knob (7) fully counter-
clockwise.
q Press CON key (5).
Does message display read -
TEST PASSED:
SENSITIVITY/BRIGHTNESS CONTROL
Figure 6-2. Operator Assisted Self-Test (Sheet 11 of 29)
Volume Ill
6-13
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |