|
|
TM 9-4931-381-14&P-1
FRAME 2
Disconnect W10 Cable:
1.
Set TEST SET POWER switch (1) to OFF.
CAUTION
Make sure connector (2) is unplugged from 115 \/ ac source
and power supply (3) is set to OFF before disconnecting W10
cable (4) from TSTS (5) to prevent damage to the TSTS (5).
2.
Set power supply ON/OFF switch (6) to OFF.
..
Unplug power supply (3) from 115 V ac source.
3
Unplug connector (2) from 115 V ac source.
4.
5.
Disconnect W10 cable connector P1 (7) from test set connector J13 PWR
IN (8). Put dust cap (9) on connector P1 (7).
6.
Disconnect W10 cable leads (10) from power supply output bus terminals on rear of
power supply (3).
GO TO FRAME 3
Volume I
Para. 4-18
Change 1 4-27
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |