 |
|||
|
|
|||
|
Page Title:
Inspect Accessory/Storage Assembly Cover Equipment |
|
||
| ||||||||||
|
|
 TM 9-4931-381-14&P-1
FRAME 11
Inspect Accessory/Storage Assembly Cover Equipment:
Remove TRU holding plate assembly (1) from inner retaining lid (2) by removing four
1.
bolts (3).
Look at plate (1) for scratches and broken or missing hardware. If bad, repair plate;
2.
refer to volume IV, para. 3-9.
Look at each cable assembly, W1 through W9, W11, and W12 (4) for cuts and breaks
3.
in insulation. If bad, repair cable; refer to volume lV, para. 3-6.
Pull off dust cap (5) and look at each cable connector (6) for bent, pushed in, or
4.
missing pins. If any damage is found, repair cable; refer to volume lV, para. 3-6.
Find cable assemblies W11 (7) and W12 (8). Look at pushbutton switch (9) on each
5.
cable for damage or looseness. If bad, replace switch; refer to volume IV, para 3-6.
Find cable assembly W9 (10). Takeoff video multiplexer assembly (11) from cable
6.
assembly W9 (10). Look at video multiplexer assembly (11) for bent or broken pins.
If bad, turn in.
GO TO FRAME 12
Volume I
4-23
Para. 4-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals