|
|
TM 9-4931-381-14&P-1
Connect W10 Cable (Continued):
CAUTION
Make sure connector (1) is unplugged from 115 V ac source
and power supply (2) is set to OFF before connecting W10
cable (3) to TSTS (4) to prevent damage to the TSTS (4).
Connect W10 cable connector P1(5) to test set connector J13 PWR IN (6).
1.
Plug connector (1) into 115 V ac source.
2.
Plug power supply (2) into 115 V ac source.
3.
Set power supply ON/OFF switch (7) to ON.
4.
Set power supply voltage to 281 V dc and power supply current to maximum.
5.
Set TEST SET POWER switch (8) to ON. Automatic self-test will now run. Wait 15
6.
seconds.
GO TO FRAME 9
Volume I
Para. 4- 17
4-20 Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |