2950-01-048-8870">
|
|
![]() TM 9-2990-206-34&P
d. Part Number. Indicates the
acter alphabetical abbreviation (e.g.,
primary number used by the manu-
ea, in, pr, etc). When the unit of
facturer (Individual, company, firm,
measure differs from the unit of issue,
corporation, or Government activity),
the lowest unit of issue that will sat-
which controls the design and charac-
isfy the required units of measure will
teristics of the item by means of its
be requisitioned.
engineering drawings, specifications,
h. Quantity Incorpo rated in Unit.
standards, and inspection requirements
Indicates the quantity of the item
to identify an item or range of items.
used in the breakout shown on the illus-
tration figure, which is prepared for
a functional group, subfunctional group,
NOTE
or an assembly. A "V" appearing in
When a stock numbered item
this column in lieu of a quantity indi-
is requisitioned, the item
cates that no specific quantity is a -
received may have a different
plicable, (e.g., shims, spacers, etc).
part number than the part
being replaced.
B-4. SPECIAL INFORMATION.
Federal Supply Code for Manu-
a. Repair Parts Kits. Repair
facturer(FSCM).
The FSCM is a 5-digit
Parts kits appear as the last entries
numeric code listed in SB 708-42 which
in the repair" parts listing for the
is used to identify the manufacturer,
figure in which its parts are listed as
distributor, or Government agency, etc.
repair parts.
f. Description. Indicates the
b. Special Tool Sets. Special
Federal' item name and, if required, a
tool sets are stocked for initial issue.
minimum description to identify the
Tool set components are requisitioned
i tern. Items that are included in kits
as individual items. Stockage of
and sets are listed below the name of
tools that are duplicated in tool sets
the kit or set with the quantity of
for other vehicles assigned or support-
ed are not required beyond actual need.
each item in the kit or set indicated
in the quantity incorporated in unit
Column. When the part to be used
B-5. HOW TO LOCATE PARTS.
differs between serial numbers of the
same model, the effective serial num-
When National Stock number or
bers are shown as the last line of the
Part Numbe r Is Unknown:
description. In the Special Tools List,
(1)First. Using the table of
the initial basis of issue (BOI) appears
contents, determine the functional
as the last line in the entry for each
subgroup within which the item belongs.
special tool, special TMDE, and other
This is necessary since illustrations
special support equipment. When density
are prepared for functional subgroups,
of equipments supported exceeds density
and listings are divided into the same
spread indicated in the basis of issue,
groups.
the total authorization is increased
(2) Second. Find the illus-
accordingly.
tration covering the functional sub-
g. Unit of Measure (U/M). Indi-
group to which the item belongs.
cates the standard of the basic quan-
(3) Third. Identify the item on
tity of the listed item as used in per-
the illustration and note the illus-
forming the actual maintenance function.
tration figure and item number of the
This measure is expressed by a two-char-
i tern.
B-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |