INSTALL DUST DETECTOR COVER, PACKING WITH RETAINER, CHAIN FASTENER, CHAIN "S" HOOK, AND CHAIN

TM 9-2990-206-34&P

ASSEMBLY--Continued.

INSTALL DUST DETECTOR COVER, PACKING WITH

RETAINER, CHAIN FASTENER, CHAIN "S" HOOK,

AND CHAIN

TOOLS:

./2 inch, 1/2 inch drive socket

1/2 inch drive, O to 300 pound-inches torque wrench

NOTE

This procedure applies to "clean

air" turbosupercharger only.

INSTALLATION:

1. Position dust detector cover (A) on

compressor housing (B). Ensure

mounting holes are properly alined.

2. Install new packing with retainer (C)

on cap screw (D).

3. Install assembled chain fastener (E),

"S" hook (F), and chain (G) on cap

screw and flat washer (H).

4. Secure dust detector cover to

compressor housing with attaching

hardware.

5. Using 1/2 inch socket and torque

wrench, torque tighten cap screws to

120 pound-inches (13.6 N.m).

NOTE

Ensure the longer cap screw (I)

is installed in the position

shown.

3 - 3 0 Change 1