INSTALL COMPRESSOR HOUSING INLET AND OUTLET ADAPTERS

TM 9-2990-206-34&P

ASSEMBLY--Continued.

INSTALL COMPRESSOR HOUSING INLET AND OUTLET

ADAPTERS

TOOLS:

9/16 inch, 1/2 inch drive deep well socket

5/8 inch, 1/2 inch drive deep well socket

1/2 inch drive, O to 300 pound-inches torque wrench

NOTE

This procedure applies to "clean

air" turbosupercharger only.

INSTALLATION:

1. Install new preformed packings (A)

and (B) on compressor housing inlet

adapter (C) and outlet adapter (D).

NOTE

The inlet adapter is slightly

larger than the outlet adapter and

requires the larger preformed

packings.

2. Install adapters with preformed packings

in compressor housing (E).

3. Using deep well sockets arid torque

wrench, torque adapters to 60

pound-inches (6.8 N.m).

TA293557

3-28

Change 1