INSPECT CLAMP

TM 9-2990-206-34&P

INSPECTION-Continued.

INSPECT CLAMP

Inspect clamp (A) for cracks or separated welds (B).

2. Inspect nut (C) and yoke stud (D) for thread damage,

3. Replace cracked or damaged clamp or nut.

INSPECT MOUNTING LEGS AND OIL DRAIN TUBE

1. Inspect mounting legs (E) and oil drain tube (F)

for cracks. Look for bent or crushed drain tube (F).

2. Inspect weld at tube and flange joint.

3. Replace cracked mounting legs. Replace cracked,

bent, or crushed oil drain tube.

INSPECT HEAT SHIELD

1. Inspect heat shield (G) for cracks and deformation.

Tag deformed heat shield for possible repair.

2. Replace cracked heat shield

INSPECT TURBINE HOUSING

Inspect turbine housing (H) for cracks. Look

for distorted or warped mounting flanges (J),

(K), and (L).

Inspect for evidence of contact or interference (M)

with the turbine wheel.

Inspect for missing, broken, loose, or damaged studs

(N). Tag loose or damaged studs for repair. Inspect

tapped holes (P) for thread damage.

Replace turbine housing if cracked, or if mounting

flanges are distorted.

TA097817

3-11