REMOVE PREFORMED PACKINGS, FILTER RETAINING STRAP AND FILTER FROM DUST DETECTOR COVER

TM 9-2990-206-34&P

DISASSEMBLY--Continued.

REMOVE PREFORMED PACKINGS, FILTER RETAINING STRAP

AND FILTER FROM DUST DETECTOR COVER

NOTE

This procedure applies to

"clean air" turbosuper-

charger only.

REMOVAL:

1. Remove filter retaining strap (A) and

filter (6).

2. Remove and discard three preformed

packings (C) from underside of dust

detector cover.

REMOVE COMPRESSOR COVER INLET AND OUTLET ADAPTERS

AND PREFORMED PACKINGS

TOOLS:

9/16 inch offset box wrench

5/8 inch offset box wrench

REMOVAL:

1. Using 5/8 inch box wrench, remove

compressor cover inlet adapter (A).

2. Using 9/16 inch box wrench, remove

compressor cover outlet adapter (B).

3. Remove and discard two preformed

packings (C).

TA293544

Change 1

3-10.1