REMOVE RETAINING RINGS , THRUST WASHER, AND SLEEVE BEARING

TM 9-2990-206-34&P

DISASSEMBLY-Continued.

REMOVE RETAINING RINGS , THRUST WASHER, AND SLEEVE

BEARING

TOOLS :

Internal retaining ring pliers

REMOVAL:

Using internal retaining ring pliers (A),

remove and discard retaining ring (B) from

housing bore.

2. Turn center housing over ( 180 ). Using

retaining ring pliers (A), remove and dis-

card retaining ring (C) from housing bore.

3. Remove and discard thrust washer (D) from

housing bore.

4. Remove and discard sleeve bearing (E) from

housing bore.

5. Using retaining ring pliers, remove and

discard retaining ring (F) from housing

bore.

TA097815

3-9