|
|
TM 9- 2990- 205- 34&P
-
-
-
ASSEMBLY AND OPERATIONAL TESTING - CONTINUED
-
0012 00
8. Installation of Turbine Housing, Shield, Preformed Packing and Compressor Cover.
NOTE
Table 3--1 provides information for proper indexing of the turbine housing and compressor
cover according to engine model and mounting location. Table 3--1 applies to both "clean air"
and standard turbosuperchargers.
a. Place turbine housing (5) on studs.
b. Install bearing housing with compressor and turbine wheels (6) in turbine housing.
c.
Align marks (7) scribed in housing flanges during disassembly. If alignment marks cannot be located, or if
either housing has been replaced, refer to Table 3--1 to determine proper housing positions.
3
6
4
2
1
7
5
03i496m
0012 00- 9
-
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |