Removal of Compressor Wheel Shims, Retaining Ring, and Flinger Sleeve Insert.

TM 9- 2990- 205- 34&P

DISASSEMBLY OF THE TURBO INTO COMPONENT PARTS - CONTINUED

0008 00

4. Removal of Compressor Wheel Shims, Retaining Ring, and Flinger Sleeve Insert.

a. Place turbo on turbine housing studs (1) with improvised support block (2) under the turbine wheel. See WP

NOTE

The support block prevents the turbine wheel and shaft assembly from dropping into the

turbine housing during disassembly and possibly damaging the wheel blades.

b. Remove and discard compressor wheel shims (3).

NOTE

Compressor wheel shims may stick to the back of the compressor wheel.

03i460m

0008 00- 5