 |
|||
|
|
|||
|
Page Title:
Removal of the Compressor Cover and Clamp. |
|
||
| ||||||||||
|
|
 TM 9- 2990- 205- 34&P
-
-
-
DISASSEMBLY OF THE TURBO INTO COMPONENT PARTS - CONTINUED
-
0008 00
2. Removal of the Compressor Cover and Clamp.
a. Using metal scriber, scribe alignment marks on compressor cover (1) and bearing housing (2).
NOTE
If your turbo is a newer model, alignment marks will be cast into the housings, and the above
step will not be necessary. Take careful note of the matched alignment marks to ensure prop-
er reassembly.
b. Remove nut (3) from clamp (4). Loosen clamp and slide it down on bearing housing.
CAUTION
Use care when lifting compressor cover to prevent damage to compressor wheel.
c.
Remove compressor cover.
d. Remove clamp.
e. Remove and discard preformed packing (5) from bearing housing.
5
1
2
3
ALIGNMENT
MARKS
4
03i458m
0008 00- 3
-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals