Remove four screws

TM 9-2920-258-30&P

14 Remove four screws (30). From inside stator assembly (2), remove brush rigging

assembly (31) and bearing retainer (32). Using a Bearing Puller with Slide Hammer,

remove bearing (33).

15 Remove four screws (34) and four Iockwashers (35) from connector assembly (41).

Remove two screws (36), two Iockwashers (37), two screws (38) and two Iockwashers

(37) from jumper connector (39).

Remove terminal cover (40).

Remove seven screws (42) and seven Iockwashers (43) from S.R. end housing (1).

Separate the S.R. end housing (1) from stator assembly (2).

Pull jumper connector (39) back away from stator assembly (2) exposing all wires.

3-7