Remove cover plate

TM 9-2920-257-30&P

(2) Remove cover plate (fig. 3-1).

NOTE

S c r i b e cover plate and drive end housing assembly before

removing cover plate.

(a) Remove six screws (4) and eight screws (5) securing cover

plate (6) to drive end housing assembly (21).

(b) Remove cover plate (6).

(3) Remove connector assembly and mounting plate (fig. 3-2).

(a) Remove two brass bolts (1) securing two heavy black

connector leads and thin red lead to positive rectifier heat sink.

(b) Remove four screws (2) and lock washers (3) securing

connector assembly (4) and mounting plate (5) to drive end housing

assembly (6).

M o v e connector assembly and mounting plate to expose

printed circuit panel assembly (7).

securing three thin black connector leads and two thin black brush

leads to printed circuit panel assembly (7).

(d) Remove connector assembly (4) and mounting plate (5) from

drive end housing assembly (6).

S c r i b e mounting plate and drive end

h o u s i n g assembly.

3-4