CHAPTER 1. INTRODUCTION - TM-9-2920-257-30-P0007

TM 9-2920-257-30&P

CHAPTER 1

INTRODUCTION

Section I. GENERAL

1-1. SCOPE

This manual provides instructions for repairing and testing the 200-ampere generators, PN 2260AC, NSN 2920-01-147-

1575, PN A0012266AA, NSN 2920-01-238-9710, PN N1205, NSN 2920-01-298-8072, and PN N1206, NSN 2920-01-292-

2993. Throughout this manual the generators will be referred to by part number.

1-2. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)

If equipment needs improving, let us know. Send us an EIR. You, the user, are the only one who can tell us what you

don't like about your equipment. Let us know why you don't like the design. Put it on an SF368 (Quality Deficiency

Report). Mail it to Commander, U. S. Army Tank-Automotive and Armament Command, Attn: AMSTA-IM-OP, Warren,

MI 48397-5000. We'll send you a reply.

Section II. SPECIAL TOOLS AND EQUIPMENT

1-3. FABRICATED TOOLS

Generator disassembly and assembly requires the use of fabricated tools. See Appendix F for materials and dimensions

required to fabricate the necessary tools. Fabricate special wiring harnesses to test generators on the test stand, see

1-4. SPECIAL EQUIPMENT

Appendix D lists common tool sets, supplemental sets, and special tools/fixtures needed to maintain the 200-ampere

generator.

Change 1 1-1/ (1-2 Blank)