Remove attaching pair of pole shoe screws

TM 9- 2920- 232- 34&P / TO 38X14- 2- 32

- -

DISASSEMBLY OF THE STARTER ASSEMBLY - CONTINUED

0008 00

e. Remove attaching pair of pole shoe screws (10) while supporting pole shoe (11) inside frame (8).

Using care so that field windings (12) are not damaged, remove six pole shoes (11) from inside frame (8).

g. Press insulator support (13) inward until support is clear of mounting hole in the frame (8). Remove winding

(12) from inside the frame.

h. Remove insulator support (13) and washer (14) from winding stud (15).

Remove insulator (16) and three insulator plates (17).

Inspect frame assembly for cracks and distortion. Replace if defective.

Inspect tapped holes in frame. Replace frame assembly if threads are stripped.

Check field windings for insulation breakdown with ohmmeter. Attach one probe of ohmmeter to the frame and

the other probe to one of the field winding terminals. The resistance should not be less than one meg--ohm.

Replace field winding assembly if resistance is less.

m. Inspect the terminal screw for damaged threads. Replace if threads are stripped.

END OF WORK PACKAGE

0008 00008/00-bl9nk

0- 19 20 -1a