Recoverability Code - TM-9-2920-225-34P0004

TM 9-2920-225-34P

Recoverability

fourth positions of the Uniform SMR Code format as

Defination

Reparable item. Repair, condemnation and disposal not

follows:

authorized below depot/specialized repair activity level

(a) The maintenance code entered in the third

Item requires special handling or condemnation proce-

position will indicate the lowest maintenance level

dures because of specific reasons (i.e., precious metal

authorized to remove, replace, and use the support

content high dollar value, critical material or hazardous

item. The maintenance code entered in the third

material). Refer to appropriate manuals/directives for

position will indicate one of the following levels of

specific instructions

maintenance:

c. Federal Stock Number. Indicates the Federal

Application/Explanation

stock number assigned to the item and will be used

Code

Crew or operator maintenance performed within organiza-

for requisitioning purposes.

tional maintenance.

NOTE

Support item is removed, replaced at the organizational

Federal stock numbers that are missing for

level.

P source-coded items are not currently

Support item is removed, replaced, used at the direct

recorded in the AMDF. When these stock

support level.

numbers are broadcast in the AMDF, they

Support item is removed, replaced, used at the general

support level.

will be provided by a change to this manual.

Support items that are removed, replaced, used at depot,

d. Part Number. Indicates the primary number

mobil depot, specialized repair activity only.

used by the manufacturer (individual, company,

(b) The maintenance code entered in the

firm, corporation, or Government activity), which

fourth position indicates whether the item is to be

controls the design and characteristics of the item by

repaired and identifies the lowest maintenance level

means of its engineering drawings, specifications

with the capability to perform complete repair (i.e.,

standards, and inspection requirements, to identify

all authorized maintenance functions). This position

an item or range of items.

will contain one of the following maintenance codes:

e. Federal Supply Code for Manufacturer (FSCM).

The FSCM is a 5-digit numeric code listed in SB

Code

Application/Explanation

708-42 which is used to identify the manufacturer,

The lowest maintenance level capable of complete repair

distributor, or Government agency, etc.

the support item is the organizational level.

f. Description. Indicates the Federal item name

The lowest maintenance level capable of complete repair of

the support item is the direct support level.

and, if required, a minimum description to identify

The lowest maintenance level capable of complete repair of

the item.

the support item is the general support level.

g. Unit of Meaure (UIM). Indicates the standard of

The lowest maintenance level capable of complete repair of

the basic quantity of the listed item as used in

the support item is the depot level, performed by (enter ap-

performing the actual maintenance function. This

plicable activity) depot, mobile depot or specialized repair

activity.

measure is expressed by a two-character alphabeti-

Repair restricted to designated Specialized Repair Activ-

cal abbreviation (e.g., ea, in, pr, etc). When the unit of

ity.

measure differs from the unit of issue, the lowest unit

Non-reparable. No repair is authorized.

of issue that will satisfy the required units of

No repair is authorized. The item maybe reconditioned by

measure will be requisitioned.

adjusting, lubricating, etc., at the user level. No parts or

h. Quantity Incorporated in Unit. Indicates the

special tools are procured for the maintenance of this item.

quantity of the item used in the breakout shown on

(3) Recoverability Code. Recoverability codes are

the illustration figure, which is prepared for a

assigned to support items to indicate the disposition

functional group, subfunctional group, or an assem-

action on unserviceable items. The recoverability

bly. A "V" appearing in this column in lieu of a

code is entered in the fifth position of the Uniform

quantity indicates that no specific quantity is

SMR Code format as follows:

applicable, (e.g., shims, spacers, etc).

Recoverability

Definition

Code

4. Special Information.

Nonreparable item. When unserviceable, condemn and

dispose at the level indicated in position 3.

a. Usable on codes are shown in the description

Reparable item. When uneconomically reparable, con-

column. Identification of the usable on codes used in

demn and dispose at organizational level.

this publication are:

Reparable item. When uneconomically reparable, con-

Used on

Code

demn and dispose at the direct support level.

Prestolite Model AMA-5102UT

Reparable item. When uneconomically reparable, con-

Leece-Neville Model 3002AC

demn and dispose at the general support level.

Leece-Neville Model 3002AD

Reparable item.. When beyond lower level repair capability,

Leece-Neville Model 5504AA

return to depot. Condemnation and disposal not authorized

Leece-Neville Model 5504AB

below depot level.