 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Fan Clutch Maintenance Instructions (Cont)
(20) Remove needle bearing (25).
(21) Loosen setscrew (26) until 1/4-in. (6 mm) of setscrew is sticking
out of load cell assembly (27).
(22) Remove load cell assembly (27) from fan pulley (20). Remove
setscrew (26).
CAUTION
Make sure tool No. 6 is centered on thrust washer, or retaining
ring and thrust washer may be damaged.
(23) Support load cell assembly (27) with suitable blocking.
CAUTION
Pressing thrust washer more than 1/32-in. (0.8 mm) may damage
parts in load cell.
(24) Press thrust washer (28) down 1/32-in. (0.8 mm) using tool
No. 6 and remove retaining ring (29).
(25) Remove thrust washer (28) and two springs (30).
(26) Remove four screws (31) and two oilers (32).
(27') Remove piston housing (33) from clutch body (34).
(28) Remove two preformed packings (35 and 36) from clutch
body (34).
18-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals