Disassembly-continued - TM-9-2815-224-34-P0399

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

(26) Support operating fork (37) with wrench.

(27) Press operating shaft spacer (38) from

operating fork (37). Remove operating fork.

(28) Remove operating shaft spacer (38), operating

shaft (35), upper bearing (39), and operating

lever (40) from governor housing (1).

(29) Press operating shaft (35) from upper bearing (39) and

-..

operating lever (40).

NOTE

Measure and note length of gap adjusting screw to aid in

assembly.

(30) Loosen jamnut (41) and remove gap adjusting

screw (42).

(31) Press pin (43) from operating lever (40).

(32) Press lower bearing (44) from governor housing (1).

15-7