 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Turbocharger Maintenance Instructions (Cont)
c. Assembly
Using retaining ring pliers,
(1)
install retaining ring (1).
Install thrust washer (2),
(2)
bearing (3), and retaining
ring (4) in turbine side of center
housing (5).
Install retaining ring (6), thrust
(3)
washer (7), and bearing (8) in
center housing (5).
NOTE
There are two turbocharger models. D
O
steps (4) and (5) for Model A and (5.11
through (5.3) for Model B. Refer to
TM 9-2320-279-24P.
Aline holes and notch (9) in
(4)
thrust. washer (10) and install
over pins (11) in center
housing (5).
(5) Install thrust collar (12) and
seal ring (13).
(5.1) Install shaft collar (13.1) in
thrust washer bearing (13.2).
(5.2) Install center housing (5) in
soft-jaw vise and install thrust
washer bearing (13.2) in center
housing with three
screws (13.3).
(5.3) Install seal ring (13.4).
14-51
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals