Disassembly-continued - TM-9-2815-224-34-P0381

TM 9-2815-224-34&P

Turbocharger Maintenance Instructions (Cont)

CAUTION

Be careful when removing turbine housing and compressor housing in order to

prevent damaging housing.

Matchmark compressor housing (1), coupling (2), and compressor backplate (3).

(1)

Matchmark turbine housing (4), coupling (5), and center housing (6).

(2)

Loosen coupling (2) and remove housing (1) and coupling.

(3)

Loosen coupling (5) and remove center housing (6) and coupling from housing (4).

(4)

Remove turbocharger guard (6.1) and seal (6.2) from intake side of compressor housing (1).

(4.1)

Install turbine wheel (7) in holding fixture. Remove locknut (8).

(5)

NOTE

Distance between assembly and work surface should be no more than one inch.

With Soldier B holding the center housing (6), Soldier A supports the turbine wheel (7) in one

(6)

hand and with the other hand gently taps shaft (9) with rubber mallet to loosen impeller (10).

CAUTION

Do not pry off impeller. Damage will occur.

Remove impeller (10) from shaft (9).

(7)

14-45

Change 2