 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2815-224-34&P
Blower Maintenance Instructions (Cont)
NOTE
Tag and mark wires before disconnecting.
(11) Disconnect two wires (20) from buffer swtich (2 1).
(12) Remove two cotter pins (22) and clevis pins (23) from injector control tube levers (24) on both
sides of engine.
(13) Remove connecting pin (25) and fuel rod connecting pin (26).
NOTE
Tag and mark fuel control rods.
(14) Remove two fuel control rods (27) through cylinder head (28).
(15) Loosen four clamps (29) and slide hose (30) clear of cover tube onto governor.
(16) Disconnect variable low speed limiting governor (31 ) at hose fitting (32).
(17) Remove four screws (33) and
washers (34) from blower (35).
(18) Remove six screws (36) and
retainers (37).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals