Assembly-continued - TM-9-2815-224-34-P0302

TM 9-2815-224-34&P

Fuel Injector Maintenance Instructions (Cont)

(28) Install plunger pin (25) into follower guide (26).

(29) Aline slot on follower guide (26) with flat side of plunger pin (25) and stop pin (24) on injector

body (2).

(30) Install plunger pin (25) and follower guide (26).

NOTE

Make sure follower spring holds stop pin in body.

(31) Hold spring (23) up from body (2), push follower guide (26) down and install stop pin (24) into

slots in body (2) and on follower guide.

(32) Remove injector assembly (22) from rack tester kit.

12-20