Disassembly. - TM-9-2815-224-34-P0288

TM 9-2815-224-34&P

Fuel Injector Maintenance Instructions (Cont)

a. Disassembly.

(1) Put injector assembly (1) upright in rack tester kit.

NOTE

One filter is used in inlet side injector. No filter is

used in outlet side injector.

(2) Remove two injector fittings (2), two gaskets (3),

and one filter (4) from injector body (5).

(3) Press follower guide (6) down by hand, raise follower spring (7) above stop pin (8), and remove

stop pin. Allow follower spring to rise slowly.

(4) Remove follower guide (6), plunger pin (9), and follower spring (7).

12-6